Type III Hard Anodized Billet AR-15 80% Lower Receiver, Ambi
Among the most well-liked platforms for both novice and expert manufacturers is the AR15. With our Type III Hard Anodized Ambidextrous AR-15 Lower, you may enjoy the unmatched quality of the Type III Hard Anodized Billet-Ambi.
With its ambidextrous bolt release, curved cuts, and a plethora of extra adjustment options, it offers a novel twist on our classic AR15 design. Together, they weigh the same as our traditional, thinner lower!
Utilize its incredibly extensive aftermarket support to completely tweak and personalize your project. We craft our superior lowers with exceptionally tight tolerances, employing industry-leading CNC machines.
Also,
Our 80% lower receivers are made from aerospace grade 6061 aluminum that is supplied in the United States. Compared to other alloys, the material is easier to mill, more resilient to corrosion, and more robust.
Features: Construction made of CNC-milled 6061 aluminum
- Magwell Broached/Flared
- Concealed Trigger Guard
- Threaded Screw Hole for Bolt Catch
- Rear Takedown Pin Detent Hole with Threading
- Engraving on Fire Selector on the Type III Hard Anodized Billet – Ambi
- Adaptable Trigger for Before-Travel Pickup
- Tensioner for Upper/Lower Receiver
- Rear Takedown Lug Pocket Completed
- Complete Mil-Spec Parts Interoperability
- Contains Ambi Hardware Set and Bolt Catch Screw Set.
Please note that the photographs show the bolt catch to indicate features unique to Ambi. It is not included.
For the Ambi Hardware Set assembly instructions, go to your lower. AR-15 80% Lower Receiver.
In the 80% and the gun business at large, 80 Percent Arms aims to deliver the best possible customer care. You may build with confidence since we offer a lifetime warranty on all of our goods.
Since client happiness is our main priority, you can always count on timely and informative information. Please contact us at sales@80percentarmsbroker.com or through our live chat feature if you have any questions or issues about our products!
Type III Hard Anodized Billet – Ambi
SHIPPING LIMITATIONS:
This item is prohibited for shipment to the following states: California, Colorado, Connecticut, Hawaii, Illinois, Maryland, New Jersey, New York, Oregon, Pennsylvania, Rhode Island, Washington, D.C., and Philadelphia.
Mark G. –
It was very easy to setup and use as for the fit nice and tight the design is on the money and the direction is so simple to work with. Here is my first build it a 450 bushmaster
Dale G. –
It was very easy to understand and figure out since it was my first time I wasn’t sure how easy it would be but I can’t believe how easy it was with 80%arms jig I’ll definitely be doing more
Alexander U. –
It works well
Spyro MaGuy –
Awesome and super easy to use.
Baron M –
Very precise jig A+
Rosaline –
Beautiful machinery equipment.
Christopher P. –
The results obtained from using this jig were manufactured quality. I have used different jigs in the past and have gotten subpar results. With this jig and a router you can achieve professional results on your 80% lower.
Frank Depp –
Amazing quality easy setup just always make sure you get lined up in that pilot hole but it’s the best jig I have used
todd frenchman –
Works like a champ. Easy to do! Was really messy at first even with the vac Installed. Came up with adding a second vac and it cleaned up the operation alot.
Nick M. –
An amazing jig. Completely fool proof and quickest way I’ve ever had to complete an 80.
Nick M. –
Great products and the instructions were very simple to follow. Completed my very first 80% lower in about 1 hr start to finish. Took me longer than expected because I was being very meticulous on the measurements, but you really don’t have to with this jig, very user friendly and makes some clean cuts.
David P. –
Love it. Milled my 9mm lower and it is working like a champ. Great jig and super easy to use. I highly recommend it for beginners.
Bennie B. –
This jig is awesome to use compared to my old Gen1. I’ve been using the Gen1 for years and the Gen3 blows it away. Now I just need to sell both my Gen1 (AR10/AR15) jigs to help with hefty price tag. But all in all I’m very happy with it and it is worth the money. This thing should last a long time and will hopefully be the last jig I ever buy.
Adam S. –
This jig is dummy proof! I have now milled out seven lowers, including several polymer lowers. Each one has turned out perfect. Damn near look professional milled!
Adam S. –
Quality seems fantastic!! I’ve milled three lowers sofar on this jig and this first one was slightly off due to human error! But the next two were flawless!! Setting it up is not too difficult and very easy to use! I would absolutely recommend this jig to anyone trying build their own rifle!
Walters –
As a retiree, I’ve found something fun and rewarding to do with my time. Very easy to use and built to last.
Diane Moore –
This jig is spectacular!!! Far exceeded my expectations and incredibly easy to use. I only have one issue and that is my wife says I need to slow down on my AR building. Lol, but I highly recommend the easy jig above any other.
Bill w. –
It was as good if not better then store bought It turns out finely milled like it would on a CNc machine Take your time little bit at a time and you will be surprised as I was when I did my first one well worth the money. I got 5 lowers to make it worth the buy of the jig just wish it wasn’t so expensive
Nick M. –
very nice engineering
Kenneth H. –
I would like to thank 80%arms for not only pretty quick shipping but the product is solid. I am handy so this only took me about 30-45 minutes to complete my lower. And I am very pleased with the final product. I still have to test fire but all around I would highly recommend this. I absolutely plan on buying another one soon
Kim M. –
Super simple jig to use. I have completed a polymer and an aluminum lower easily and have several more builds planned. My main advice would be to take your time and make slow passes for the best quality cuts. It is a fairly messy process the shop vac attachment is handy and of course eye protection would be highly recommended obviously.
Harry Lynn –
This was my first attempt and let me tell you I highly recommend 80%arms all you need kit I took longer to make sure I didn’t screw it up but let me tell you it was near impossible to mess it up even though I have never done it before! Highly recommended!!!!! You wont be disappointed I will definitely be buying more!!!
Hugh G. –
The jig oh is easy to use. I have done two lowers so far and both turned out awesome. I am very happy with the whole setup.
Goir LA –
Everything went together well and functioned perfectly. After machining the lower receivers they were assembled without any issues. Clearance for the trigger assembly was perfect. It’s difficult to debur the inside of the receivers if you don’t have the right tools, but I would not consider that to be a point against the manufacture or design of tRead more about review stating Everything went together well andhe lower or jig. Completely satisfied with my purchase. It was exactly as advertised and functioned perfectly.
Thomas W. –
Definitely worth the wait. I couldn’t be happier. The AR 9 I’ve completed building is fantastic. Really looking forward to completing the rest of the builds. I have a lower already set up and ready to go for a project this weekend. 100% worth every penny and takes your gun building hobby to another level.
Paul W. –
Awesome kit super easy
Savage L –
Easy to set up and use. Great jig and material
Marshal Von –
This jig set is flawless. I have completed 5 lowers at an hour a piece. The router and speed mill are a must with this jig. Totally worth the price.
Zachary W. –
The quality of this kit is excellent. Very user friendly and easy to follow directions. Would recommend this kit for anyone starting out or upgrading.
Elizabeth Sharp –
Great jig for first-time ar9 build, excellent instructions very easy would recommend
Eddie C. –
It worked well for me. The only issue that I had was that I didn’t know that each notch on the jig was for one pass. but I figured that out pretty quick. I’m sure it would have mentioned it in the instructions but who reads those right?
Rosaline –
Highly recommend this if you’re looking to build your own rifle and have no clue where to start. This thing almost made milling out a lower easier than filling out the paper work to buy an already stripped one. Took 45 minutes to do my first one from the time I clamped it in vise to cleaning up and the huge mess it makes.
Rita Bryant –
The 80 percent complete lower jig has great finish and feels great. The process was easy. The kit came with everything needed to complete the job. It was easy to assemble. The lower finish was awesome. There were no nicks or scratches on the lower when done. The lower parts kit fit together well